Simply
put, beer is fermented; hop flavoured, malt sugared, liquid. The basic
ingredients of beer are water, malt, hops, and yeast. The major variation in
beer is the type of yeast used to ferment the product.
Professor ‘Tola Atinmo, Department of
Human Nutrition, University of Ibadan; described beer as an alcoholic beverage
made by brewing and fermentation from cereals, usually malted barley, and
flavoured with hops and the like for a slightly bitter taste’. According to
him, Beer is an alcoholic beverage usually made from malted cereal grain (as
barley), flavoured with hops and brewed by slow fermentation’.
Prof
Atinmo even classified beer as a foodstuff. His words: “Beer is not medicine to
be prescribed by doctors but rather a foodstuff that should be approached
within social environs that are mature, considerate and reasonable. Unlike
other foodstuffs, which are consumed by every category of people, he said beer
is not meant for under-aged people.
Barley
may not be a good raw material for making bread, but it is a great input in
beer production. There are three major types of barley. These are
differentiated by the number of seeds at the top of the stalk. Barley seeds
grow in two, four and six rows along the central stem. European brewers
traditionally prefer the two-row barley because it malts best and has a higher
starch/husk ratio than four or six-row barley. Some brewers prefer six-row
barley because it is more economical to grow and has a higher concentration of
enzymes needed to convert the starch in the grain into sugar and other
fermentables.
Barley
must be malted before being used to brew beer. Malting is a process of bringing
grain to its highest point of possible soluble starch content by allowing it to
sprout roots (germinate) and take the first step to becoming a normal,
photosynthesizing plant. It is at this point that the seed is rich in the
starch it needs to use as food for growth. Then, the maltster heats the grain
to a temperature that stops the growth process but allows a natural enzyme,
diastase, (which converts starch into sugar or maltose) to remain active. It is
this sugar or maltose that the yeast metabolizes into carbon dioxide and ethyl
alcohol. Some of the malted barley is or can be heated at a higher temperature
to roast it. The roasted malted barley no longer has the active enzymes needed
to turn the starch into sugars, but does impart characteristics that add flavor
to the beer. The degree of roasting determines the color of the beer and the
greatest roasted malted barley will impart its roasted flavor to the beer.
Hops
(humulus lupulus) are a flowering vine whose flowers are used as a preservative
and for their essential oils that add flavour (bittering hops) and aroma (aroma
hops) to balance the sweetness of the malt. Usually dried before use, the
bitter flavor of the hop is extracted during the boil. The aroma is provided by
aroma hops whose essential oils provide the aroma. Each variety of hops has its
own distinct flavour aroma profile.
Yeast
is unicellular fungi. Yeast is the most essential, yet least understood aspect
of brewing beer. Since the 1850s, it has been scrutinized by such famous
scientists as Pasteur, Guy-Lussac, and van Leeuwenhoek. Most brewing yeast
belongs to the genus Saccharomyces.
The
yeast is there to convert the sugars in the wort into alcohol. The first stage
of this process is called the “lag” phase, marked by the breaking of proteins
into their constituent amino acids. The ferment then enters the “respiration”
phase, where the yeast absorbs oxygen and reduces the pH of the wort, so that
it becomes acidic and anaerobic. The yeast breaks down the glucose sugars into carbon
dioxide, water, and pyruvic acid. Pyruvic acid later becomes alcohol. Yeast
cannot ferment all sugars, which is why beer still has a sweet taste at the end
of the ferment. The strain of yeast will impart its own flavor although malt
and hops are the main flavor components. Yeast that adds little in the way of
flavors is usually described as having a “clean taste”. Yeast produce three
metabolic by-products that affect beer taste: phenols – spicy or clove like
taste or medicinal taste; esters – a fruity taste; Diacetyls – a butterscotch
or “woody” taste. The presence of any of these flavor components depends
largely on the style of beer being brewed. Much depends on individual palates
and the effect the brewer is aiming for.
Ale
yeast ferments at the “top” of the fermentation vessel, at a higher temperature
than lager yeast and work quicker. (Ale at 60°-75°F) Ale yeast is Saccharomyces
cerevisiae. The average fermentation for ale yeast is 7-8 days. Ale yeast
produce by-products of fermentation called esters, the “flowery” aromas of
apple, pear, pineapple, grass, hay, plum, and prune that are characteristic of
ale.
Lager,
(lagern) the German word for “to store”, is an excellent description of a beer
kept in a cold dark place for 30 days or more. Lager yeast work best at a
temperature around 34°F, ferments at the “bottom” of the fermenting vessel and
works slowly. Lager yeast produce fewer aromatics than ale yeast and, as a
result of the lack of esters, allows the aroma of the hop to be prominent,
complementing the sweet flavor of the malt.
Some
beer styles are “spiced” with ingredients such as coriander, curacao, all-spice
and others.
Adjuncts,
other ingredients such as rice or corn, can be used to “extend” the ingredients
imparting a “clean” to “no taste” and providing the beer with longer shelf
life.
Now,
water, malted barley, hops, yeast and corn are some of the ingredients
used to brew beer. Hops add spicy aroma and bitter flavors. Yeast changes sugars
into alcohol. Corn and other adjuncts give beer a milder and lighter-bodied flavour.
So, what is in beer that is not in other commonly consumed foods? Absolutely
nothing!
No comments:
Post a Comment